Toyota Venza: Defogging the windshield
Press 
.
The air conditioning system control operates automatically.
Recirculated air mode will automatically switch to outside air mode. It is not possible to return to recirculated air mode when the switch is on.
Pressing 
again will revert to the
previous air outlet mode.
Adjusting the settings
- Adjusting the temperature setting
Turn the temperature control dial clockwise (warm) or counterclockwise (cool).
The air conditioning system switches between dual and simultaneous modes each ...
Adjusting the position and opening and closing the air outlets
► Front center outlets
Direct air flow to the left or right, up or down.
►Front side outlets
1. Direct air flow to the left or right, up or down.
2. Turn the knob to open or close ...
Other materials about Toyota Venza:
On-vehicle Inspection
ON-VEHICLE INSPECTION
CAUTION / NOTICE / HINT
CAUTION:
Be sure to follow the correct removal and installation procedures of the driver
side knee airbag assembly.
PROCEDURE
1. INSPECT DRIVER SIDE KNEE AIRBAG ASSEMBLY (VEHICLE NOT INVOLVED IN COLLISION)
...
Automatic High Beam System (B124B)
DESCRIPTION
The DTC is stored when the main body ECU (driver side junction block assembly)
detects malfunctions in the automatic high beam system.
DTC No.
DTC Detection Condition
Trouble Area
B124B
...
Actuator Check
ACTUATOR CHECK
1. ACTUATOR CHECK
(a) Start the engine and warm it up.
(b) Perform the indicator check (See page
).
(c) Press the "Recirculation/Fresh" switch to perform the actuator check.
HINT:
Be sure to perform the actuator check after ...
0.1653