CUSTOMIZE PARAMETERS
1. CUSTOMIZING FUNCTION WITH TECHSTREAM
HINT:
The following items can be customized.
NOTICE:
(a) Connect the Techstream to the DLC3.
(b) Turn the ignition switch to ON.
(c) Turn the Techstream on.
(d) Enter the following menus: Customize Setting / Illuminated Entry.
(e) Select the setting by referring to the table below.
Illuminated Entry
Tester Display |
Default |
Contents |
Setting |
---|---|---|---|
Lighting Time |
15 s |
Changes the lighting time after closing all of the doors. (It will fade out immediately in case of turning the ignition switch from off to ACC or ON.) |
15 s, 7.5 s or 30 s |
I/L when ACC OFF |
ON |
Lights up the transponder key amplifier*1, roof console box assembly, step or spot light assembly and engine switch illumination*2 when the ignition switch is turned from ACC or ON to off. |
ON or OFF |
I/L ON W/Door Key Unlock |
ON |
Lights up the transponder key amplifier*1, roof console box assembly, step or spot light assembly and engine switch illumination*2 when doors are unlocked using a mechanical key or door control transmitter. |
ON or OFF |
Room Light when Aprchd*2 |
ON |
Lights up the roof console box assembly, step or spot light assembly and engine switch illumination when the key enters any actuation area around the doors. |
ON or OFF |
Interior Light Control |
ON |
Lights up the transponder key amplifier*1, roof console box assembly, step or spot light assembly and engine switch illumination*2 when the illuminated entry function is operating. |
ON or OFF |
HINT:
Data List / Active Test
DATA LIST / ACTIVE TEST
1. DATA LIST
HINT:
Using the Techstream to read the Data List allows the values or states of switches,
sensors, actuators and other items to be read without removing any parts. This non-intrusive
inspection can be very useful bec ...
Wireless Transmitter Memory Function does not Operate
DESCRIPTION
With the ignition switch off and the driver door closed, pressing the manual
lock or unlock switch on the power window regulator master switch assembly while
holding a seat memory switch (M1 switch or M2 switch) will register the transmitter
...
Certification ECU Vehicle Information Reading/Writing Process Malfunction (B15F7)
DESCRIPTION
This DTC is stored when items controlled by the certification ECU (smart key
ECU assembly) cannot be customized via the audio and visual system vehicle customization
screen.
HINT:
The certification ECU (smart key ECU assembly) controls the s ...