CUSTOMIZE PARAMETERS
1. CUSTOMIZING FUNCTION WITH TECHSTREAM (REFERENCE)
HINT:
The following items can be customized.
NOTICE:
(a) Connect the Techstream to the DLC3.
(b) Turn the ignition switch to ON.
(c) Turn the Techstream on.
(d) Enter the following menus: Customize.
(e) Select the setting by referring to the table below.
Power Window
Tester Display |
Default |
Content |
Setting |
---|---|---|---|
P Window Auto Up |
Avail |
This function is used to enable or disable the auto up function for the front passenger door window using the power window regulator switch assembly (for front passenger side). |
Avail or Not Avl |
P Window Auto Up From Driver |
Avail |
This function is used to enable or disable the remote auto up function for the front passenger door window using the master switch. |
Avail or Not Avl |
RR Window Auto Up |
Avail |
This function is used to enable or disable the auto up function using the rear power window regulator switch assembly RH. |
Avail or Not Avl |
RR Window Auto Up From Driver |
Avail |
This function is used to enable or disable the remote auto up function for the rear RH door window using the master switch. |
Avail or Not Avl |
RL Window Auto Up |
Avail |
This function is used to enable or disable the auto up function using the rear power window regulator switch assembly LH. |
Avail or Not Avl |
RL Window Auto Up From Driver |
Avail |
This function is used to enable or disable the remote auto up function for the rear LH door window using the master switch. |
Avail or Not Avl |
Door Mirror Foot Light Circuit
DESCRIPTION
The main body ECU (driver side junction block assembly) controls the door mirror
foot lights.
WIRING DIAGRAM
1. w/o Seat Position Memory:
2. w/ Seat Position Memory:
PROCEDURE
1.
CHECK VEHICLE CONDITION
...
Removal
REMOVAL
PROCEDURE
1. REMOVE REAR DOOR SCUFF PLATE LH
2. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP LH
3. REMOVE TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)
4. REMOVE DECK BOARD ASSEMBLY
5. REMOVE NO. 3 DECK BOARD SUB-ASSEMBLY
6. REMOVE DECK ...
Dtc Check / Clear
DTC CHECK / CLEAR
HINT:
Use the Techstream to read and clear the DTC of the occupant classification ECU,
otherwise the DTCs cannot be read and cleared.
1. DTC CHECK
(a) Turn the ignition switch off.
(b) Connect the Techstream to the DLC3.
(c) Turn the ...