CUSTOMIZE PARAMETERS
1. CUSTOMIZE LIGHTING SYSTEM (EXT)
HINT:
The following items can be customized.
NOTICE:
(a) Customizing with the Techstream
(1) Connect the Techstream to the DLC3.
(2) Turn the ignition switch to ON.
(3) Turn the Techstream on.
(4) Enter the following menus: Customize Setting / Light Control or Illuminated Entry.
(5) Select the setting by referring to the table below.
Light Control
Display |
Default |
Content |
Setting |
Relevant ECU |
---|---|---|---|---|
Disp Ex ON Sen |
NORMAL |
Changes the ambient brightness level required to dim the lights such as the indicator lights of the combination meter, A/C indicator light and clock.*A |
LIGHT2, LIGHT1, NORMAL, DARK1 or DARK2 |
Main Body ECU (Driver Side Junction Block Assembly) |
Disp Ex OFF Sen |
NORMAL |
Changes the ambient brightness level required to cancel the dimming of the lights such as the indicator lights of the combination meter, A/C indicator light and clock.*B |
LIGHT2, LIGHT1, NORMAL, DARK1 or DARK2 |
|
Light Auto OFF Delay |
30 s |
Keeps the headlights on for a certain period of time after turning the ignition switch off and closing all doors with the low beam headlights on. |
OFF, 30 s, 60 s or 90 s |
|
Sensitivity |
Normal |
Adjusts the sensitivity of the automatic light control system.*C |
Light2, Light1, Normal, Dark1 or Dark2 |
|
DRL Function |
ON |
ON/OFF of the DRL function |
ON or OFF |
|
Automatic High Beam* |
ON |
ON/OFF of the automatic high beam function |
ON or OFF |
HINT:
The sensitivity adjustment may be difficult to confirm. Check by driving the customer's vehicle.
*A
Brightness level required to dim the lights |
|||||
Setting |
DARK2 |
DARK1 |
NORMAL |
LIGHT1 |
LIGHT2 |
Brightness level required to cancel the dimming of the lights |
|||||
Setting |
DARK2 |
DARK1 |
NORMAL |
LIGHT1 |
LIGHT2 |
Sensitivity of the automatic light control system |
|||||
Setting |
Dark2 |
Dark1 |
Normal |
Light1 |
Light2 |
Tester Display |
Default |
Content |
Setting |
Relevant ECU |
---|---|---|---|---|
Mirr-Foot-Lgt Approached |
ON |
Lights up the door mirror foot lights when a key enters any actuation area around the doors. |
ON or OFF |
Main Body ECU (Driver Side Junction Block Assembly) |
Mirr-Foot-Lgt Unlocked |
ON |
Lights up door mirror foot lights when doors are unlocked using a mechanical key or door control transmitter. |
ON or OFF |
|
Mirr-Foot-Lgt w/Master SW |
ON |
|
ON or OFF |
|
Mirror Foot Lighting Time |
15 s |
Changes the lighting time of the door mirror foot lights. |
7.5 s, 15 s, 30 s or 0 s |
|
Exterior Light Control |
ON |
Changes the door mirror foot light control. |
ON or OFF |
Rear Occupant Classification Sensor LH Circuit Malfunction (B1782)
DESCRIPTION
The rear occupant classification sensor LH circuit consists of the occupant classification
ECU and rear occupant classification sensor LH.
DTC B1782 is recorded when a malfunction is detected in the rear occupant classification
sensor LH circ ...
VC Output Circuit
DESCRIPTION
The ECM constantly generates 5 V of power from battery voltage supplied to the
+B (BATT) terminal to operate the microprocessor. The ECM also provides this power
to the sensors through the VC output circuit.
When the VC circuit is short-cir ...
Components
COMPONENTS
ILLUSTRATION
ILLUSTRATION
ILLUSTRATION
ILLUSTRATION
ILLUSTRATION
...