Toyota Venza manuals

Toyota Venza: Correct driving posture

Drive with a good posture as follows:


1. Sit upright and well back in the seat.

2. Adjust the position of the seat forward or backward to ensure the pedals can be reached and easily depressed to the extent required. 3. Adjust the seatback so that the controls are easily operable.

4. Adjust the tilt and telescopic positions of the steering wheel downward so the airbag is facing your chest.

5. Lock the head restraint in place with the center of the head restraint closest to the top of your ears. 6. Wear the seat belt correctly.

CAUTION

 - While driving

• Do not adjust the position of the driver’s seat.

Doing so could cause the driver to lose control of the vehicle.

• Do not place a cushion between the driver or passenger and the seatback.

A cushion may prevent correct posture from being achieved, and reduce the effectiveness of the seat belt and head restraint, increasing the risk of death or serious injury to the driver or passenger.

• Do not place anything under the front seats.

Objects placed under the front seats may become jammed in the seat tracks and stop the seat from locking in place. This may lead to an accident.

The adjustment mechanism may also be damaged.

- Adjusting the seat position

• Do not recline the seat more than necessary when the vehicle is in motion, to reduce the risk of sliding under the lap belt.

If the seat is too reclined during an accident, the lap belt may slide past the hips and apply restraint forces directly to the abdomen or your neck may contact the shoulder belt, increasing the risk of death or serious injury.

• Take care when adjusting the seat position to ensure that other passengers are not injured by the moving seat.

• Do not put your hands under the seat or near the moving parts to avoid injury.

Fingers or hands may become jammed in the seat mechanism.

Safety information
...

SRS airbags
The SRS airbags inflate when the vehicle is subjected to certain types of severe impacts that may cause significant injury to the occupants. They work together with the seat belts to help reduce t ...

Other materials about Toyota Venza:

Malfunction in Deceleration Sensor (C1245/93)
DESCRIPTION If a malfunction in the deceleration sensor circuit occurs, the AWD control ECU will output this DTC. DTC No. DTC Detecting Condition Trouble Area C1296/96 When the following conditio ...

System Description
SYSTEM DESCRIPTION 1. GENERAL The windshield deicer system's thin heater wires are attached to the inside of the front window and deice the window surface quickly. The indicator light illuminates while the system is operating. The system automaticall ...

Diagnostic Trouble Code Chart
DIAGNOSTIC TROUBLE CODE CHART HINT: If a trouble code is displayed during the DTC check, inspect the trouble areas listed below for that code. For details of the code, refer to the following "See page". Power back door system DTC C ...

© 2016-2024 Copyright www.tovenza.com

0.1307