Toyota Venza: Control Module Communication Bus OFF (U0073/86,U0100/85,U0129/83)

Toyota Venza Service Manual / Mf1a Transfer / 4wd / Awd / Active Torque Control 4wd System / Control Module Communication Bus OFF (U0073/86,U0100/85,U0129/83)

DESCRIPTION

The AWD control ECU inputs the signals sent from the ECM and skid control ECU via the CAN communication system.
When DTCs indicating a CAN communication system malfunction are output, repair the CAN communication system before repairing each corresponding sensor.

DTC No.	DTC Detection Condition	Trouble Area
U0073/86	When the following continues for 5 seconds or more: - Signals from the AWD control ECU are not received. When the following occurs 10 times consecutively: - A communication malfunction (bus off) occurs one or more times within 0.1 seconds.	CAN communication system
U0100/85	When both of the following continue for 2 seconds or more: - The voltage of the IG1 terminal is 10 V or more. - At a vehicle speed of 60 km/h (38 mph) or more, communication with the ECM cannot be performed.	CAN communication system
U0129/83	When the following continues for 3 seconds or more: - The voltage of the IG1 terminal is 10 V or more. - Communication with the skid control ECU cannot be performed.	CAN communication system

PROCEDURE

1.	CHECK FOR DTC

(a) Check for DTCs (See page ).

(b) Record the output DTCs (active torque control 4WD system).

HINT:

When DTCs indicating a CAN communication system malfunction are output, repair the CAN communication system before repairing each corresponding sensor.

GO TO CAN COMMUNICATION SYSTEM

Low Power Supply Voltage (C1241/94)

DESCRIPTION If a malfunction in the power source circuit occurs, or a malfunction in communication with the skid control ECU or in a speed sensor occurs, the AWD control ECU will prohibit operati ...

Malfunction in Deceleration Sensor (C1245/93)

DESCRIPTION If a malfunction in the deceleration sensor circuit occurs, the AWD control ECU will output this DTC. DTC No. DTC Detecting Condition Trouble Area ...

Other materials about Toyota Venza:

Freeze Frame Data
FREEZE FRAME DATA 1. DESCRIPTION The ECM records vehicle and driving condition information as freeze frame data the moment a DTC is stored. When troubleshooting, freeze frame data can be helpful in determining whether the vehicle was moving or ...

Terminals Of Ecu
TERMINALS OF ECU 1. CHECK AWD CONTROL ECU (a) Measure the voltage and resistance of the connector. Terminal No. (Symbol) Terminal Description Condition Specified Condition 14 (CANH) - 16 (CANL) ...

Short in Curtain Shield Squib LH Circuit (B1835/58-B1838/58)
DESCRIPTION The curtain shield squib LH circuit consists of the center airbag sensor assembly and curtain shield airbag assembly LH. The center airbag sensor assembly uses this circuit to deploy the airbag when deployment conditions are met. These DTCs ...