Toyota Venza: Components

Camshaft Oil Control Valve

...

On-vehicle Inspection

ON-VEHICLE INSPECTION PROCEDURE 1. INSPECT CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (a) Connect the Techstream to the DLC3. (b) Start the engine and turn the Techstream on. (c) Inspect the oil ...

Other materials about Toyota Venza:

Installation
INSTALLATION CAUTION / NOTICE / HINT HINT: Use the same procedure for the RH side and LH side. The procedure listed below is for the LH side. PROCEDURE 1. INSTALL POWER WINDOW REGULATOR SWITCH ASSEMBLY (a) Engage the 2 claws ...

SRS Warning Light does not Come ON
DESCRIPTION The SRS warning light is located on the combination meter assembly. When the SRS is normal, the SRS warning light comes on for approximately 6 seconds after the ignition switch is turned from off to ON, and then goes off automatically. If ther ...

Disassembly
DISASSEMBLY PROCEDURE 1. REMOVE BRAKE PEDAL RETURN SPRING (a) Remove the brake pedal return spring from the brake pedal support assembly. 2. REMOVE BRAKE PEDAL PAD (a) Remove the brake pedal pa ...