Toyota Venza: Combination Meter

Toyota Venza Service Manual / Meter / Gauge / Display / Combination Meter

Components

COMPONENTS

ILLUSTRATION

Disassembly

DISASSEMBLY

PROCEDURE

1. REMOVE COMBINATION METER GLASS

(a) Disengage the 9 claws to remove the combination meter glass.

Removal

REMOVAL

PROCEDURE

1. REMOVE LOWER STEERING COLUMN COVER

2. REMOVE UPPER STEERING COLUMN COVER

3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page ).

4. REMOVE INSTRUMENT CLUSTER FINISH PANEL

(a) Remove the 2 clips.

(b) Disengage the 3 claws and remove the instrument cluster finish panel.

5. REMOVE COMBINATION METER ASSEMBLY

(a) Remove the 4 screws.

(b) Disconnect the connectors and remove the combination meter assembly.

Reassembly

REASSEMBLY

PROCEDURE

1. INSTALL COMBINATION METER GLASS

(a) Engage the 9 claws to install the combination meter glass.

Installation

INSTALLATION

PROCEDURE

1. INSTALL COMBINATION METER ASSEMBLY

(a) Connect the connectors.

(b) Install the combination meter assembly with the 4 screws.

2. INSTALL INSTRUMENT CLUSTER FINISH PANEL

(a) Engage the 3 claws.

(b) Install the instrument cluster finish panel with the 2 clips.

3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page ).

4. INSTALL UPPER STEERING COLUMN COVER

5. INSTALL LOWER STEERING COLUMN COVER

Problem Symptoms Table

PROBLEM SYMPTOMS TABLE HINT: Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order ...

Other materials about Toyota Venza:

Types of child restraints
Child restraint systems are classified into the following 3 types according to the age and size of the child. ► Rear facing -- Infant seat/convertible seat ► Forward facing -- Convertible seat ► Booster seat - When install ...

Vsc Off Switch
Components COMPONENTS ILLUSTRATION Removal REMOVAL PROCEDURE 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL NOTICE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page ). 2. REMOVE FR ...

Reassembly
REASSEMBLY PROCEDURE 1. INSTALL REAR DRIVE SHAFT DUST COVER (a) Using SST and a steel plate, install a new rear drive shaft dust cover to the rear drive shaft inboard joint assembly. Text in Illustration *1 ...

Toyota Venza: Combination Meter

Problem Symptoms Table

Drive Monitor Switch

Other materials about Toyota Venza: