Toyota Venza manuals

Toyota Venza: Cleaning and protecting the vehicle exterior

Toyota Venza Owners Manual / Maintenance and care / Maintenance and care / Cleaning and protecting the vehicle exterior

Perform the following to protect the vehicle and maintain it in prime condition.

• Working from top to bottom, liberally apply water to the vehicle body, wheel wells and underside of the vehicle to remove any dirt and dust.

Wash the vehicle body using a sponge or soft cloth, such as a chamois.

• For hard-to-remove marks, use car wash soap and rinse thoroughly with water.

• Wipe away any water.

• Wax the vehicle when the waterproof coating deteriorates.

If water does not bead on a clean surface, apply wax when the vehicle body is cool.

 - Automatic car washes

• Before washing the vehicle, do the following.

• Fold the mirrors back.

• Turn the power back door system off.

• Brushes used in automatic car washes may scratch the vehicle surface and harm your vehicle’s paint.

 - High pressure car washes

• Do not allow the nozzles of the car wash to come within close proximity of the windows.

• Before car wash, check that the fuel filler door is closed.

- Aluminum wheels


• Remove any dirt immediately by using a neutral detergent. Do not use hard brushes or abrasive cleaners. Do not use strong or harsh chemical cleaners. Use the same mild detergent and wax as used on the paint.

• Do not use detergent on the wheels when they are hot, for example after driving for long distance in the hot weather.

• Wash detergent from the wheels immediately after use.

- Bumpers and side moldings


Do not scrub with abrasive cleaners.

CAUTION

 - Caution about the exhaust pipe

Exhaust gasses cause the exhaust pipe to become quite hot.

When washing the vehicle, be careful not to touch the pipe until it has cooled sufficiently, as touching a hot exhaust pipe can cause burns.

NOTICE
 - To prevent paint deterioration and corrosion on the body and components (aluminum wheels etc.)


• Wash the vehicle immediately in the following cases:

• After driving near the sea coast • After driving on salted roads • If you see coal tar or tree sap on the paint surface • If you see dead insects, insect droppings or bird droppings on the paint • After driving in an area contaminated with soot, oily smoke, mine dust, iron powder or chemical substances
• If the vehicle becomes heavily soiled in dust or mud • If liquids such as benzine and gasoline are spilled on the paint surface

• If the paint is chipped or scratched, have it repaired immediately.

• To prevent the wheels from corroding, remove any dirt and store in a place with low humidity when storing the wheels.

- If the windshield washer nozzle become blocked


Contact your Toyota dealer. Do not try to clear it with a pin or other object.

This may damage the nozzle.

- Cleaning the exterior lights

• Wash carefully. Do not use organic substances or scrub with a hard brush.

This may damage the surfaces of the lights.

• Do not apply wax on the surface of the lights.

Wax may cause damage to the lenses.

- To prevent damage to the windshield wiper arms

When lifting the wiper arms away from the windshield, pull the driver side wiper arm upward first, and repeat for the passenger side. When returning the wipers to their original position, do so from the passenger side first.

Maintenance and care
...

Cleaning and protecting the vehicle interior
The following procedures will help protect your vehicle’s interior and keep it in top condition: - Protecting the vehicle interior Remove dirt and dust using a vacuum cleaner. Wipe dirty surfaces ...

Other materials about Toyota Venza:

Indicators and warning lights
The indicator and warning lights on the instrument cluster and center panel inform the driver of the status of the vehicle’s various systems. For the purpose of explanation, the following illustration displays all indicators and warning lights illuminat ...

Camshaft Position Sensor
Components COMPONENTS ILLUSTRATION Installation INSTALLATION PROCEDURE 1. INSTALL CAMSHAFT POSITION SENSOR (for Exhaust Side) (a) Apply a light coat of engine oil to the O-ring of the camshaft position sensor. NOTICE: If reusing the camshaft pos ...

Reassembly
REASSEMBLY PROCEDURE 1. INSTALL NO. 1 SUNSHADE TRIM SUB-ASSEMBLY (a) Slide and install the No. 1 sunshade trim sub-assembly. 2. INSTALL NO. 2 SUNSHADE TRIM SUB-ASSEMBLY (a) Slide and ins ...

© 2016-2024 Copyright www.tovenza.com

0.1366