PROCEDURE
1. |
CHECK LOCK FUNCTION OF CLUTCH PULLEY |
(a) Check the lock function with the pulley installed in the vehicle.
(1) Visually check that the rotor in the generator operates with the engine started.
(b) Check the lock function with the pulley removed from the vehicle.
(1) Remove the generator pulley cap.
(2) Hold the generator rotor using SST, and turn the clutch pulley clockwise to check that the outer ring locks (See page ). Text in Illustration
OK: The outer ring locks. |
|
SST: 09820-63021
NG |
REPLACE CLUTCH PULLEY |
|
2. |
CHECK LOCK OF CLUTCH PULLEY |
(a) Start the engine and visually check for looseness of the clutch pulley.
OK:
The clutch pulley is not loose.
OK |
REPLACE GENERATOR ASSEMBLY |
NG |
TIGHTEN CLUTCH PULLEY TO THE SPECIFIED TORQUE |
Removal
REMOVAL
PROCEDURE
1. PRECAUTION
CAUTION:
Be sure to read Precaution thoroughly before servicing (See page
).
If the front seat side airbag assembly was deployed, replace the front
seat side airbag assembly, front seat frame assembly wit ...
Brake
General Maintenance
GENERAL MAINTENANCE
PROCEDURE
1. INSPECT BRAKE LINE PIPES AND HOSES
HINT:
Work in a well-lighted area. Turn the front wheels fully to the right or left
before beginning the inspection.
(a) Using a mirror, check the entire circum ...
Diagnostic Trouble Code Chart
DIAGNOSTIC TROUBLE CODE CHART
HINT:
If a trouble code is output during the DTC check, inspect the trouble areas listed
for that code. For details of the code, refer to "See page" in the DTC chart.
Inspect the fuses and relays before troub ...