Toyota Venza: Certification ECU Vehicle Information Reading/Writing Process Malfunction (B15F7)

Toyota Venza Service Manual / Audio / Video / Audio And Visual System / Certification ECU Vehicle Information Reading/Writing Process Malfunction (B15F7)

DESCRIPTION

This DTC is stored when items controlled by the certification ECU (smart key ECU assembly) cannot be customized via the audio and visual system vehicle customization screen.

HINT:

The certification ECU (smart key ECU assembly) controls the smart key system related items that are customizable via the audio and visual system vehicle customization screen.

DTC No.	DTC Detection Condition	Trouble Area
B15F7	Certification ECU (smart key ECU assembly) vehicle setting processing malfunction	CAN communication system Smart key system (for Entry Function) Smart key system (for Start Function) Certification ECU (smart key ECU assembly) Radio and display receiver assembly

CAUTION / NOTICE / HINT

NOTICE:

Before replacing the certification ECU (smart key ECU assembly), refer to Registration (See page ).

PROCEDURE

1.	CHECK CAN COMMUNICATION SYSTEM

(a) Use the Techstream to check if the CAN communication system is functioning normally (See page ).

OK:

CAN communication DTCs are not output.

GO TO CAN COMMUNICATION SYSTEM

2.	CHECK SMART KEY SYSTEM (for Entry Function)

(a) Check if the smart key system (for Entry Function) is malfunctioning (See page ).

HINT:

Customization may not be possible depending on the malfunction in the smart key system (for Entry Function).

OK:

No malfunctions are present in the smart key system (for Entry Function).

GO TO SMART KEY SYSTEM (for Entry Function)

3.	CHECK SMART KEY SYSTEM (for Start Function)

(a) Check if the smart key system (for Start Function) is malfunctioning (See page ).

HINT:

Customization may not be possible depending on the malfunction in the smart key system (for Start Function).

OK:

No malfunctions are present in the smart key system (for Start Function).

GO TO SMART KEY SYSTEM (for Start Function)

4.	CHECK CUSTOMIZE ITEMS

(a) Make a note of the customizable items for each certification ECU (smart key ECU assembly) related system.

HINT:

The items shown as customizable via the audio and visual system vehicle customization screen can also be changed manually. In the following step, change the items manually.

(1) Check the customize parameters list for the smart key system (for Entry Function) related items that can be customized via the audio and visual system vehicle customization screen (See page ).

(2) Check the customize parameters list for the smart key system (for Start Function) related items that can be customized via the audio and visual system vehicle customization screen (See page ).

(b) Confirm that it is possible to manually change the settings of the customize parameters for each system that are available for customization via the audio and visual system vehicle customization screen.

OK:

The items available for customization via the audio and visual system vehicle customization screen can be customized successfully using the manual procedure.

REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY

REPLACE CERTIFICATION ECU (SMART KEY ECU ASSEMBLY)

XM Tuner Antenna Disconnected (B15FE,B15FF)

DESCRIPTION These DTCs are stored when a malfunction occurs in the roof antenna assembly which is connected to the stereo component tuner assembly. DTC No. DTC Detection Cond ...

A/C ECU Vehicle Information Reading/Writing Processor Malfunction (B15F5)

DESCRIPTION This DTC is stored when items controlled by the air conditioning amplifier assembly cannot be customized via the audio and visual system vehicle customization screen. HINT: The air co ...

Other materials about Toyota Venza:

Headlight (HI-BEAM) Circuit
DESCRIPTION for Halogen Headlight: The main body ECU (driver side junction block assembly) controls the high beam headlights. WIRING DIAGRAM CAUTION / NOTICE / HINT NOTICE: Inspect the fuses for circuits related to this system bef ...

Traffic Information is not Displayed
PROCEDURE 1. CHECK DISPLAY (a) Check which communication is not being used for displaying traffic information. HINT: Display of traffic information received via HD traffic is given priority while in an "HD Radio" ...

Cruise Control Input Processor (P1607)
MONITOR DESCRIPTION The ECM continuously monitors its main and sub CPUs while cruise control is operating. This self-check ensures that the ECM is functioning properly. If outputs from the CPUs are different and deviate from the standard, the ECM illumina ...