PROCEDURE
1. |
CHECK USAGE CONDITION |
(a) Check that the vehicle and cellular phone meet the following conditions:
NOTICE:
If changing cellular phone settings, updating software, etc. is necessary, make sure to obtain the permission of the customer before performing it.
(b) Register the cellular phone again and check if it is registered correctly.
HINT:
If operation of the cellular phone or navigation receiver assembly is requested, make sure to follow the instructions closely and perform the operation.
Result |
Proceed to |
---|---|
Cellular phone can be registered. |
A |
Cellular phone cannot be registered. |
B |
A |
END |
|
2. |
RESTART CELLULAR PHONE |
(a) Restart the cellular phone.
(b) Turn the ignition switch off.
(c) Turn the ignition switch to ACC.
(d) Register the cellular phone as a connected device again and check if it is registered correctly.
HINT:
If operation of the cellular phone or navigation receiver assembly is requested, make sure to follow the instructions closely and perform the operation.
Result |
Proceed to |
---|---|
Cellular phone can be registered. |
A |
Cellular phone cannot be registered. |
B |
A |
END |
|
3. |
BRING CELLULAR PHONE NEAR IN-VEHICLE DEVICE |
(a) Place the cellular phone close to the navigation receiver assembly.
(b) Register the cellular phone as a connected device again and check if it is registered correctly.
HINT:
If operation of the cellular phone or navigation receiver assembly is requested, make sure to follow the instructions closely and perform the operation.
Result |
Proceed to |
---|---|
Cellular phone can be registered. |
A |
Cellular phone cannot be registered. |
B |
A |
END |
|
4. |
CLEAR REGISTERED DEVICE INFORMATION |
(a) Clear all "Bluetooth" devices registered to the cellular phone and navigation receiver assembly.
(b) Register the cellular phone as a connected device again and check if it is registered correctly.
HINT:
If operation of the cellular phone or navigation receiver assembly is requested, make sure to follow the instructions closely and perform the operation.
Result |
Proceed to |
---|---|
Cellular phone can be registered. |
A |
Cellular phone cannot be registered. |
B |
A |
END |
|
5. |
CHECK USING ANOTHER VEHICLE |
(a) Check if the cellular phone can be registered normally to another "Bluetooth" compatible vehicle of the same model.
HINT:
Result |
Proceed to |
---|---|
Cellular phone can be registered. |
A |
Cellular phone cannot be registered. |
B |
A |
REPLACE NAVIGATION RECEIVER ASSEMBLY |
|
6. |
CHECK USING ANOTHER CELLULAR PHONE |
(a) Using another "Bluetooth" compatible cellular phone, register the cellular phone and check that it is registered correctly.
HINT:
Result |
Proceed to |
---|---|
Cellular phone can be registered. |
A |
Cellular phone cannot be registered. |
B |
A |
END (ONLY A "Bluetooth" COMPATIBLE CELLULAR PHONE CAN BE USED) |
B |
REPLACE NAVIGATION RECEIVER ASSEMBLY |
Lost Communication with TCM (U0101)
DESCRIPTION
The Transmission Control Module (TCM) and ECM perform 2-way communication with
each other via the Controller Area Network (CAN). The TCM sends signals to the ECM
concerning required engine speed, required engine torque, warning indicators in
...
Room Light
Components
COMPONENTS
ILLUSTRATION
Removal
REMOVAL
PROCEDURE
1. REMOVE SPOT LIGHT ASSEMBLY
(a) Using a screwdriver with its tip wrapped with protective tape, disengage
the 8 claws to remove the 2 spot light lenses.
Text in Illust ...
Dtc Check / Clear
DTC CHECK / CLEAR
1. CHECK DTC
(a) Connect the Techstream to the DLC3.
(b) Turn the engine switch on (IG).
(c) Turn the Techstream on.
(d) Enter the following menus: Body Electrical / Starting Control or Power Source
Control / Trouble Codes.
(e) Read t ...