PROCEDURE
1. |
CHECK IF A PROPER CD IS INSERTED |
(a) Make sure that the CD is an audio CD or a CD with an MP3, WMA or AAC files, and that it is not deformed, flawed, stained, deteriorated or otherwise defective.
OK:
Normal CD.
HINT:
NG |
CHANGE CD |
|
2. |
CHECK THAT CD IS INSERTED PROPERLY |
(a) Check the CD is inserted upside down.
OK:
CD is properly inserted.
NG |
INSERT CD PROPERLY |
|
3. |
CLEAN CD AND RECHECK |
(a) Clean the CD by wiping it clean with a soft cloth from the inside to the outside in a radial direction. OK: Malfunction disappears. NOTICE: Do not use a conventional record cleaner or anti-static preservative. |
|
OK |
END (CD WAS DIRTY) |
|
4. |
REPLACE CD AND RECHECK |
(a) Replace the CD with a new or known good one and check that the malfunction disappears.
OK:
Malfunction disappears.
OK |
END (CD WAS FAULTY) |
NG |
REPLACE NAVIGATION RECEIVER ASSEMBLY |
Adjusting the position and opening and closing the air outlets
► Front center outlets
Direct air flow to the left or right, up or down.
►Front side outlets
1. Direct air flow to the left or right, up or down.
2. Turn the knob to open or close the vent.
►Rear center outlets
1. Direct air flow ...
Hill-start assist control
Hill-start assist control helps to prevent the vehicle from rolling backwards
when starting on incline or slippery slope.
To engage hill-start assist control, further depress the brake pedal when the
vehicle is stopped completely.
A buzzer will sound o ...
Dtc Check / Clear
DTC CHECK / CLEAR
1. CHECK DTC
(a) Connect the Techstream to the DLC3.
(b) Turn the engine switch on (IG).
(c) Read the DTC by following the prompts on the Techstream screen.
HINT:
Refer to the Techstream operator's manual for further details.
2. CL ...