Toyota Venza: Back door

Toyota Venza Owners Manual / Before driving / Opening, closing and locking the doors / Back door

The back door can be opened using the back door opener. The back door can be locked and unlocked using the entry function (vehicles with smart key system), wireless remote control or door lock switch.

In addition, the power back door (if equipped) can be opened using the power back door switch or wireless remote control.

- Unlocking and locking the back door

► Entry function (vehicles with smart key system)

► Wireless remote control

►Door lock switch

- Opening the back door from outside the vehicle

► Back door opener

Raise the back door while pushing up the back door opener switch.

► Wireless remote control (vehicles with power back door)

- Opening the back door from inside the vehicle (vehicles with power back door)

Push and hold the switch to open/close.

Pressing the switch again while the power back door is operating will cause the operation to reverse.

However, the reverse operation cannot be performed for the first second after pressing the switch to operate the door.

Automatic door locking and unlocking systems

The following functions can be set or canceled: - Setting and canceling the functions ► Setting and canceling the functions Vehicles with TFT type multi-information display The functi ...

When closing the back door

Lower the back door using the back door handle, and make sure to push the back door down from the outside to close it. Be careful not to pull the back door sideways when closing the back door wit ...

Other materials about Toyota Venza:

Fail-safe Chart
FAIL-SAFE CHART 1. FAIL-SAFE FUNCTION If the following malfunctions occur, the AWD control ECU will stop the function of 4WD control system or partly change the function to control the system. If a malfunction occurs in the senso ...

Steering wheel
The steering wheel can be adjusted to a comfortable position. Hold the steering wheel and press the lever down. Adjust to the ideal position by moving the steering wheel horizontally and vertically. After adjustment, pull the lever up to secure the stee ...

Front Passenger Side Power Window Switch
Components COMPONENTS ILLUSTRATION Removal REMOVAL PROCEDURE 1. REMOVE POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (a) Using a moulding remover, disengage the 2 clips and 4 claws. ...