The system sounds the alarm and flashes lights when forcible entry is detected.
- Triggering of the alarm
The alarm is triggered in the following situations when the alarm is set.
• A locked door is unlocked or opened in any way other than by using the entry function (vehicles with smart key system), the wireless remote control door lock function or the mechanical key. (The doors will lock again automatically.) • The hood is opened.
• The battery is reconnected.
• The side windows are tapped or broken.
- Setting the alarm system
Close the doors and hood, and lock all doors using the entry function (vehicles with smart key system) or the wireless remote control. The system will be set automatically after 30 seconds.
The indicator light changes from being on to flashing when the system is set.
- Deactivating or stopping the alarm
Do one of the following to deactivate or stop the alarm.
• Unlock the doors using the entry function (vehicles with smart key system) or the wireless remote control.
• Start the engine. (The alarm will be deactivated or stopped after a few seconds.)
- System maintenance
The vehicle has a maintenance-free type alarm system.
- Items to check before locking the vehicle
To prevent unexpected triggering of the alarm and vehicle theft, make sure of the following.
• Nobody is in the vehicle.
• The windows and moon roof are closed before the alarm is set.
• No valuables or other personal items are left in the vehicle.
- Triggering of the alarm
The alarm may be triggered in the following situations.
(Stopping the alarm deactivates the alarm system.)
• The doors are unlocked using the mechanical key.
• A person inside the vehicle opens a door or hood.
• The battery is recharged or replaced when the vehicle is locked.
- Panic mode
►Vehicles with smart key system
When is pressed for longer than
about one second, an alarm will sound for about 60 seconds and the vehicle lights
will flash or come on to deter any person from trying to break into or damage your
vehicle.
To stop the alarm, press any button on the wireless remote control.
►Vehicles without smart key system
- Customization
Settings (e.g. time elapsed before the alarm is set) can be changed.
(Customizable features )
NOTICE
- To ensure the system operates correctly
Do not modify or remove the system. If modified or removed, the proper operation of the system cannot be guaranteed.
Hydraulic Test
HYDRAULIC TEST
1. PERFORM HYDRAULIC TEST
(a) Measure the line pressure.
CAUTION:
The line pressure test should always be carried out with at least 2 people. One
person should observe the condition of wheels and wheel chocks while the other is
perform ...
Cellular Phone Registration Failure
PROCEDURE
1.
CHECK USAGE CONDITION
(a) Check that the vehicle and cellular phone meet the following conditions:
NOTICE:
If changing cellular phone settings, updating software, etc. is necessary, make
sure to obtain the per ...
Inspection
INSPECTION
PROCEDURE
1. INSPECT SHIFT LOCK CONTROL UNIT ASSEMBLY (w/o Smart Key System)
(a) Measure the voltage according to the value(s) in the table below.
Text in Illustration
*1
Component with harness c ...