Toyota Venza manuals

Toyota Venza: ABS Malfunction (C1296/96)

DESCRIPTION

If a malfunction in the speed sensor signal circuit occurs, the AWD control ECU will output this DTC.

DTC No.

DTC Detecting Condition

Trouble Area

C1296/96

When condition is met:

  • - Wheel speed sensor malfunction is received from the skid control ECU.
  • Brake control system (speed sensor circuit)
  • AWD control ECU

CAUTION / NOTICE / HINT

HINT:

Check the condition of each related circuit connector before troubleshooting (See page ).


PROCEDURE

1.

CHECK FOR DTC (BRAKE CONTROL SYSTEM)

(a) Check if the speed sensor DTC (brake control system DTC) is output (See page ).


Result

Proceed to

Brake control system DTC (speed sensor DTC) is not output

A

Brake control system DTC (speed sensor DTC) is output

B


A

REPLACE AWD CONTROL ECU


B

REPAIR CIRCUITS INDICATED BY OUTPUT DTCS (BRAKE CONTROL SYSTEM)

Cancellation of 4WD Control (C1299/99)
DESCRIPTION If wheel slip continues, differential control will be disabled when the torque-distribution ratio of the differential clutch exceeds the set value and a malfunction in the ...

Linear Solenoid Circuit (C1298/98)
DESCRIPTION The AWD control ECU receives signals from each sensor to control clutch pressure to distribute torque according to the driving conditions. DTC No. DTC Detection C ...

Other materials about Toyota Venza:

Front Airbag Sensor LH Malfunction (B1615/14)
DESCRIPTION The front airbag sensor LH circuit consists of the center airbag sensor assembly and front airbag sensor LH. The front airbag sensor LH detects impacts to the vehicle and sends signals to the center airbag sensor assembly to determine if the ...

Transmitter ID1 Error (C2141/41-C2144/44)
DESCRIPTION The tire pressure warning valve and transmitter installed in each tire and wheel assembly measures the tire pressures. The measured values are transmitted as radio waves to the tire pressure warning antenna and receiver on the body and then se ...

Torque Converter Clutch Pressure Control Solenoid Performance (Shift Solenoid Valve SLU) (P2757)
SYSTEM DESCRIPTION The TCM uses the signals from the throttle position sensor, air-flow meter, turbine (input) speed sensor, output speed sensor and crankshaft position sensor to monitor the engagement condition of the lock-up clutch. The TCM compares ...

© 2016-2024 Copyright www.tovenza.com

0.1414