DESCRIPTION
This DTC is stored when items controlled by the air conditioning amplifier assembly cannot be customized via the audio and visual system vehicle customization screen.
HINT:
The air conditioning amplifier assembly controls the air conditioning system related items that are customizable via the audio and visual system vehicle customization screen.
DTC No. |
DTC Detection Condition |
Trouble Area |
---|---|---|
B15F5 |
Air conditioning amplifier assembly vehicle setting processing malfunction |
|
PROCEDURE
1. |
CHECK CAN COMMUNICATION SYSTEM |
(a) Use the Techstream to check if the CAN communication system is functioning normally (See page ).
OK:
CAN communication DTCs are not output.
NG |
GO TO CAN COMMUNICATION SYSTEM |
|
2. |
CHECK AIR CONDITIONING SYSTEM |
(a) Check if the air conditioning system is malfunctioning (See page ).
HINT:
Customization may not be possible depending on the malfunction in the air conditioning system.
OK:
No malfunctions are present in the air conditioning system.
NG |
GO TO AIR CONDITIONING SYSTEM |
|
3. |
CHECK CUSTOMIZE ITEMS |
(a) Make a note of the customizable items for the air conditioning system.
HINT:
The items shown as customizable via the audio and visual system vehicle customization screen can also be changed using the Techstream. In the following step, the Techstream will be used.
(1) To match-up the items on the audio and visual system vehicle customization screen with the items on the Techstream, check the customize parameters list for the air conditioning system related items that can be customized via the audio and visual system vehicle customization screen (See page ).
(b) Using the Techstream, confirm that it is possible to change the settings of the air conditioning system related customize parameters that are shown as customizable via the audio and visual system vehicle customization screen.
OK:
The items available for customization via the audio and visual system vehicle customization screen can be customized successfully using the Techstream.
OK |
REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY |
NG |
REPLACE AIR CONDITIONING AMPLIFIER ASSEMBLY |
If you have a flat tire
Remove the flat tire and replace it with the spare provided. - Before
jacking up the vehicle
• Stop the vehicle on a hard, flat surface.
• Set the parking brake.
• Shift the shift lever to “P”.
• Stop the engine.
• Turn on the emergency f ...
Inspection
INSPECTION
PROCEDURE
1. INSPECT STEERING PAD SWITCH ASSEMBLY
(a) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Tester Connection
Condition
Specified Condition
...
Reassembly
REASSEMBLY
CAUTION / NOTICE / HINT
HINT:
Use an overhaul stand as necessary.
PROCEDURE
1. INSTALL DIFFERENTIAL RING GEAR
(a) Clean the contact surfaces of the rear differential case sub-assembly and
differential ring gear.
(b) Heat the differential ri ...